Colder mornings, wetter weather and increasingly closed windows could be creating the perfect conditions for condensation and mould to thrive in home across the UK without people realising.
As autumn sets in, moisture can easily become trapped inside the home. Combined with more washing being dried indoors and households beginning to use their heating again, everyday habits can quickly raise humidity levels, creating the damp conditions mould needs to grow.
In fact, internal data from ventilation specialists envirovent found that enquiries for free home surveys relating to damp, mould and condensation issues rose by 86% during the autumn months of September to November, compared with summer.
Ruth MacEachern, ventilation expert at envirovent, has revealed six common mistakes that contribute to mould and condensation in the home, alongside simple steps households can take to prevent them.
Mistake: Keeping windows and trickle vents closed to keep the cold out
“Now that temperatures have dropped, it can be tempting to keep windows and trickle vents closed to avoid cool drafts in the home. However, this can trap humid air indoors, increasing the risk of condensation on colder surfaces.”
How to avoid it:
“Keep them open and clear to allow proper airflow and make sure your home is regularly ventilated.
“Creating cross-ventilation by opening windows on opposite sides of the house helps to flush stale air out and bring fresh air in. Even when it’s cold or wet outside, opening windows for just 10 minutes a day can make a huge difference.”
Mistake: Turning extractor fans off after cooking or showering
“As households spend more time indoors during the colder months, everyday activities such as cooking, showering and even boiling the kettle can cause moisture levels to rise.
“In fact, four people living in a three-bed property could produce up to 112 pints of moisture a week from just breathing, cooking, showering and boiling the kettle.”
How to avoid it:
“Bathrooms and kitchens are moisture hotspots so extractor fans should be left running for at least 15 minutes after cooking or showering to help draw out the moisture from the air.”
Alongside this you can:
- Cover pots and pans when boiling water
- Avoid opening your dishwasher until it has cooled
- Avoid opening the oven too often when cooking
- Use slightly cooler water to bathe
- Ensure the bathroom door is closed during and after taking a shower or bath
- Avoid leaving the bath filled for too long after use
Mistake: Drying washing in a room with no fresh air
“With the autumn weather making it much more difficult to dry washing outdoors, many households will be turning to indoor methods. This, however, can release litres of moisture into the air, raising indoor humidity levels and creating the ideal conditions for condensation and mould growth.”
How to avoid it:
“Try using your bathroom as a makeshift drying room. Use the towel rail to heat the room and turn the extractor fan on to draw out excess moisture. Make sure not to overcrowd the room and leave space between drying racks to boost airflow.
“Not only does this method dry clothes efficiently, but it also avoids the musty smell that can often occur with indoor drying methods.”
Mistake: Placing furniture against external walls
“As households begin using their heating more regularly, the temperature difference between internal and external walls becomes more noticeable.
“External walls are often colder than internal walls, meaning condensation forms more easily on their surface. When large furniture blocks airflow, damp patches can take longer to dry, increasing the likelihood of mould appearing.”
How to avoid it:
“As mould thrives in damp conditions with poor airflow, large furniture such as sofas, wardrobes or beds should be positioned at least two to four inches away from external walls. This allows air to circulate properly, preventing moisture build up.”
Mistake: Allowing indoor temperatures to change too much
“Large changes in temperature can increase the risk of mould. When warm, damp air suddenly cools, water can collect on cold surfaces, creating the damp conditions mould needs to grow.”
How to avoid it:
“Keeping your heating at a steady temperature helps reduce the chance of condensation forming on colder surfaces. As well as helping to prevent mould, maintaining a steady indoor temperature can sometimes be more cost-effective, rather than turning it on at a higher temperature to quickly heat the house for an hour.”
Mistake: Ignoring the early signs of mould
“One of the biggest mistakes homeowners make is ignoring the early warning signs of mould and condensation, allowing it to worsen over time.
“Persistent condensation on windows, a musty smell, allergy-like symptoms that seem worse at home, faint yellow or brown water rings on the ceiling and peeling or bubbling walls can all indicate excess moisture and the early stages of mould present in your home.”
How to avoid it:
“Regularly check your home for these signs and address them early on to reduce the risk of more serious issues developing and avoid potentially costly repairs later on.”
Ruth added: “Whilst many people don’t think about mould until winter, it’s important to remember that the problems that lead to it can begin earlier. As autumn brings colder, wetter weather homes become warmer as the heating is switched on, windows stay closed and families spend more time indoors.
“Taking a few simple steps now can help prevent mould and condensation becoming a much bigger problem later in the year.Effective ventilation systems help to remove excess moisture from the air before it has chance to settle on surfaces, maintaining healthy indoor air quality and controlling moisture levels throughout the year.”
To find out more about how to avoid damp, mould and condensation, visit https://www.envirovent.com/